Description

In order to machine the Coast Runner Universal Clamp, one needs to use a spacer block under the stock to have clearance for milling. Commonly, one can use another piece of stock for that purpose, but when both the spacer and the stock start slipping when you set your clamp on them, it starts to be annoying.
Another issue with using a piece of 20mm thick stock is that the stop block does not protude much above it.

That's why I had the idea to design this spacer, which can be used in place. It has very well adjusted rails that friction fit in the tslot table, and was designed to give good support as well as enough clearance for all the milling steps of the Universal clamp machining.

Material

Tooling

Workholding

Model Origin

The author marked this model as their own original creation.

License ©

This work is licensed under a

Creative Commons — Public Domain